OSHA-Aligned JSAs for
Electrical Contractors

Built for electrical crews handling panel upgrades, switchgear, and high-voltage work that demands NFPA 70E and OSHA compliance.

Type one sentence. Get a complete Job Safety Analysis PDF — ready to review and submit.

JSAQuick generates OSHA and NFPA 70E referenced first drafts for electrical teams. You review. You approve. You stay in control.

⚠️ Average OSHA fine: $15,625. A missing or incomplete JSA is the #1 trigger.

No credit card required • 3 JSAs free

Real output from JSAQuick — 400A panel replacement and switchgear installation in an energized facility

JSAQuick — Generated JSA Preview

#	Job Step	Potential Hazard	Control Measure	OSHA Ref.
1	Lockout / Tagout (LOTO) of all energy sources	Inadvertent re-energisation, electrocution risk from upstream breakers	Written LOTO procedure; individual hasp and keyed lock per worker; verify zero-energy with calibrated meter before opening panel	29 CFR 1910.147
2	Work within arc flash boundary on energised switchgear	Arc flash blast and thermal burns; shock from accidental contact with 480V bus	Arc flash label reviewed; minimum 40 cal/cm² FR suit, face shield, and Class 0 rubber gloves; flash boundary barricaded	NFPA 70E 2021
3	Pull wire through underground conduit vault	Confined space hazardous atmosphere (CO, H₂S), engulfment, trip hazards	Confined space permit; continuous 4-gas monitoring; retrieval tripod with lifeline; attendant at entrance at all times	29 CFR 1910.146
4	Re-energise and test new panel	Unexpected fault current, equipment damage, worker exposure during commissioning	Remove all LOTO; notify all affected workers before re-energisation; stand clear at 90° angle; all non-essential personnel evacuated	29 CFR 1926.416

1. Describe the task

Enter your job task, industry, and risk level into our simple form.

2. AI generates JSA

Our AI instantly drafts a structured JSA with specific hazards and actionable controls.

3. Download PDF

Review the generated JSA and download a formatted PDF ready for sign-off.

Everything You Need

More than just a generator

Every tool you need to create, edit, and manage your safety documents — all in one place.

AI Refine

Describe any change in plain English. The AI rewrites and updates the JSA instantly — no starting over.

Inline Edit

Click any cell in the JSA table to edit it directly in your browser. No PDF editor, no re-export needed.

Duplicate & Reuse

Clone any past JSA as a starting point. Contractors doing repeat jobs save hours every single week.

JSA Library

Every document is auto-saved and searchable. Access your full history — nothing ever lost.

Multi-Country Standards

OSHA (US), India, UAE, and Australia standards built in. UK RAMS & AU SWMS soon

Branded PDFs

Your company name, site, and supervisor printed on every document. Look professional on every job site.

Common Electrical Hazards & Safety Controls

Electrical contractors face some of the most strictly regulated safety requirements in construction. Between OSHA 1926 Subpart K and NFPA 70E, building a compliant Job Hazard Analysis (JHA) takes significant technical knowledge.

Arc Flash & Blast (NFPA 70E): Working near energized switchgear requires explicit hazard boundary calculations and strict Cal/cm2 rated arc-flash PPE.
Lockout/Tagout (LOTO) (OSHA 1910.147): Every electrical JSA must detail the exact sequence for achieving a zero-energy state, applying physical locks, and verifying with a calibrated meter.
Confined Space Entry: Pulling wire through underground vaults or tight chases introduces atmospheric and access hazards requiring specific permits.

Electrical JSA FAQs

Does the AI generator know NFPA 70E?

Yes. JSAQuick is trained to identify live-work scenarios and will actively recommend NFPA 70E PPE categories, shock boundaries, and arc flash mitigations.

Can I add site-specific LOTO procedures?

Absolutely. You can use the 'Refine' feature to instruct the AI to include your company's specific lock-out sequence or the building's exact breaker locations.

Is this OSHA compliant?

JSAQuick generates OSHA-aligned drafts with specific CFR regulation references on every control measure. Every document must be reviewed and approved by a qualified safety professional before work commences.

Can I edit the generated JSA?

Yes. Use the Refine feature to describe improvements and JSAQuick will update the JSA instantly. You can also download the PDF and edit it.

One OSHA fine averages $15,625.
JSAQuick Pro costs $79/month.
That's 16 years of protection for the price of one fine.

Monthly

Yearly Save up to 43%

Free

forever

✓ 3 JSAs total
✓ OSHA format
✓ PDF download
✓ No credit card

Get Started Free

Starter

$39

per month

Need more? Pro is only $40 more — unlimited.

✓ 12 JSAs per month
✓ OSHA format
✓ OSHA CFR citations
✓ Standard PDF
✓ 30-day library
✓ Email support

Start for $39

OSHA-Aligned JSAs forElectrical Contractors